Federal Communications Commission (FCC) Notice

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy; and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his/her own expense.

Model	A	B	C	D*	E*	F*	G*	H*	J*	K*
Rated Output Power (watts)	40	30	50	60	120	75	80	100	120	200
Peak Power (watts)	100	100	150	150	350	150	150	200	240	400
Power Stability from cold (10 min)	±6%	±6%	±7%	±7%	±9%	±7%	±7%	±10%	±10%	±10%
Mode Quality (M²)	<1.2	<1.2	<1.2	<1.2	<1.2	<1.2	<1.2	<1.2	<1.2	<1.2
Ellipticity	<1.2	<1.2	<1.2	<1.2	<1.2	<1.2	<1.2	<1.2	<1.2	<1.2
Beam Diameter (1/e²)**	1.7	1.7	1.7	7	2.0	2.7	1.7	1.7	1.7	1.7
Beam Divergence (full angle)**	7.0	7.0	7.0	1.7	6.0	4.4	1.7	1.7	1.7	1.7
Rise Time (μs)	<100	<100	<100	<100	<100	<100	<100	<100	<100	<100
Energy/pulse (J) – peak power	Depends on pulse frequency and duty cycle
Pulse Duration	Depends on pulse frequency and duty cycle
Pulse Rate (kHz) – repetition frequency	0-100
Center Wavelength (μm)	10.6
Wavelength Range (μm)	10.5-10.7
Cooling	Air

* Measurements taken after beam correction
** Some lasers may be equipped with beam expanders, specifications are subject to change.

Table of Contents

Federal Communications Commission (FCC) Notice