Backplane Board Replacement – Fusion Galvo
This document outlines the replacement of the backplane board in the G100.
Lens Replacement
This guide provides step-by-step instructions for replacing the lens assembly in the G100 model engraver. Please review all steps carefully before beginning the procedure. Make sure the machine is powered off and the work area is prepared to avoid damage to components. If you need further assistance during or after (...)
Door Damper Replacement – Fusion Galvo
This guide provides step-by-step instructions for replacing the door damper on Epilog Laser G100 series systems. The procedure shown covers the replacement of the GC0233 (right side door damper), but the steps are identical for the GC0232 (left side door damper). Before starting, verify the part number on your replacement (...)
Updating the IRIS Camera System
This document outlines the IRIS camera system update procedure in the Fusion Maker, Fusion Edge, and Fusion Pro.
Door Slide Replacement – Fusion Galvo
This guide provides step-by-step instructions for replacing the door slide on Epilog Laser G100 series systems. The process includes removing the door, installing the new slide, and reassembling the engraver. Be sure to follow all recommended safety precautions throughout the procedure. Door Slide Removal Turn off engraver Disconnect from power (...)
Door Motor Replacement – Fusion Galvo
This guide provides step-by-step instructions for replacing the door motor on Epilog Laser G100 series systems. The process includes removing the door, installing the new motor, and reassembling the engraver. Be sure to follow all recommended safety precautions throughout the procedure. Door Motor Removal Turn off engraver Disconnect from power (...)
Control Module Replacement
This guide provides step-by-step instructions for replacing the control board in the G100 system. Always wear an anti-static strap and disconnect power before beginning any maintenance procedure. Control Board Removal Turn off the engraver. Disconnect the power cable. Locate the door handles. Open the door. Loosen and remove screws. Loosen, (...)
Table Motor Replacement – Fusion Galvo
This document outlines the replacement of the z-axis motor in the Fusion Galvo.
Red Dot Diode Replacement – Fusion Galvo
This document outlines the replacement of the red dot diode assembly in the G100.
220VAC Power Connections: Core End Type and Photo
Epilog’s laser systems are equipped with auto-switching power supplies that accommodate input voltages ranging from 110 to 240 volts at 50–60Hz. We recommend using a dedicated 15A circuit breaker regardless of the operating voltage to ensure stable and reliable performance. For Systems Operating on 220V in the United States The (...)
Different Marks You Can Achieve with a fiber laser
There are many different applications or finished “looks” fiber laser systems were designed to achieve. All of these looks are created using various speed, power, frequency and focus settings on the fiber laser system. Having an open-architecture system allows manufacturers to more quickly create exactly the mark they need because (...)
How to Laser Engrave and Cut Fabrics
Fabric is quickly becoming a very popular material for both engraving and cutting. Natural fibers, as well as synthetic fabrics, are often cut and engraved with fantastic results with a laser system. This article will give an overview of some popular engraveable fabrics, as well as some fabrics we’ve learned (...)