Getting Started

Fusion Pro

Let's get started

Articles: 11 items found

Here you'll find a variety of resources for your laser - from unboxing your machine to running your very first job. You'll also find videos on recommended maintenance practices and part replacement instructions.

Pro 24, Pro 36

Welcome

Welcome to the Epilog Laser Support Center!

09/26/2024

Pro 24, Pro 36

Unpacking the Laser

Unbox your new Fusion Pro and get started!

04/02/2025

Pro 48

Unpacking the Laser

Unbox your new Fusion Pro and get started!

04/02/2025

Pro 24, Pro 36

Removing the Pedestal

Temporarily remove the Fusion Pro's pedestal to fit your machine through standard-width doorways.

09/26/2024

Pro 24, Pro 36

Setting up the Exhaust

Choose one of three options to remove fumes from your machine.

09/26/2024

Epilog Laser System Initial Setup

Configure your system settings before you start using your new Epilog.

09/26/2024

Sending Your First Job to the Laser

How to Send Your First Job to the Laser.

09/26/2024

How to Permanently Save Jobs on Your Laser Engraver

Learn to save the jobs you use most often, directly on the laser itself.

04/02/2025

Image Resolution and How it Affects Engraving

Discover how changing your DPI will give you different engraving results.

04/02/2025

Bitmap (Raster) vs Vector Graphics for Engraving

Learn the difference between printing raster and vector files.

04/02/2025

Control Panel Tour – Fusion Lasers (Pro, Edge, Maker, Galvo)

Learn all about your machine's touchscreen interface.

04/02/2025

Usage and Operation

Now that you’re up and running, it’s time to take your training to the next level. Click “next” to advance to the Usage and Operation section.

Next Section