Introduction
| Engraver Model | Maximum Static Table Weight* | Maximum Lifting Table Weight** |
| Fusion Maker 12/24/36 | 90 lbs (40.8 kg) | 60 lbs (27.2 kg) |
| Fusion Edge 12/24/36 | 90 lbs (40.8 kg) | 60 lbs (27.2 kg) |
| Fusion Pro 24/36 | Vector Grid: 60 lbs (27.2 kg) Task Plate: 90 lbs (40.8 kg) |
60 lbs (27.2 kg) |
| Fusion Pro 32/48 | Vector Grid: 85 lbs (38.6 kg) Task Plate: 150 lbs (68 kg) |
85 lbs (38.6 kg) |
| Fusion Galvo G100 | 100 lbs (46 kg) | N/A |
| Zing 16/24 | 50 lbs (22.7 kg) | 25 lbs (11.5 kg) |
| Mini 18/24 | 50 lbs (22.7 kg) | 25 lbs (11.5 kg) |
| Helix 24 | 70 lbs (32 kg) | 30 lbs (14 kg) |
| Fusion/Fusion M2 /FiberMark Fusion | 200 lbs (90 kg) | 100 lbs (46 kg) |
| Legend 36EXT | 90 lbs (41 kg) | 45 lbs (21 kg) |
| FiberMark 24/FiberMark S2 | 200 lbs (90.7 kg) | 80 lbs (36.3 kg) |
* Lifting weight refers to the maximum load that the table motor can safely lift.
**Static weight refers to the maximum load that the table assembly can safely hold while not in motion.
If attempting to mark a piece of material that exceeds the lifting weight, but not the static weight of the engraver, it is advised to move the engraver table to the appropriate focal point for that material prior to inserting the material into the engraver.
