Usage and Operation Archives

220VAC Power Connections: Core End Type and Photo

What type of power cord do I need to run on 220VAC?

Epilog’s laser systems are equipped with auto-switching power supplies that accommodate input voltages ranging from 110 to 240 volts at 50–60Hz. We recommend using a dedicated 15A circuit breaker regardless of the operating voltage to ensure stable and reliable performance. For Systems Operating on 220V in the United States The (...)

09/17/2024

Carriage Optics Removal and Installation

How do I remove and install the carriage optics in my laser?

Proper removal and installation of the carriage optics in the Fusion 17000 laser system are essential for maintaining optimal performance and precision. This guide provides step-by-step instructions for safely removing and reinstalling key components, including the mirror, lens tube, and air assist tubing. Following these procedures ensures that the optics (...)

09/25/2024

Driver and Firmware Downloads

Where can I download the latest drivers and firmware for my laser?

You can find the latest versions of Epilog Laser’s driver and firmware software available for download at www.epiloglaser.com/support/drivers/. To stay informed when a new driver version is released, join the Driver Notification mailing list located on that page.

09/26/2024

Engraver Table Weight Limits

How much weight can the Epilog engraver table hold?

Engraver Model Maximum Static Table Weight* Maximum Lifting Table Weight** Fusion Maker 12/24/36 90 lbs (40.8 kg) 60 lbs (27.2 kg) Fusion Edge 12/24/36 90 lbs (40.8 kg) 60 lbs (27.2 kg) Fusion Pro 24/36 Vector Grid: 60 lbs (27.2 kg) Task Plate: 90 lbs (40.8 kg) 60 lbs (27.2 (...)

10/18/2023

Epilog Pulse Setup Guide

How do I setup and connect my laser using the new Epilog Pulse App?

The Epilog Laser Pulse App revolutionizes laser processing by enabling you to send jobs directly to the laser from any browser. This process enhances efficiency and convenience. However, it’s necessary to establish communication between the computer and the laser before utilizing this application. Once connected, you can easily send and (...)

09/16/2024

Ethernet Connection Setup

How do I connect my machine with an Ethernet cable?

Setting up an Ethernet connection for the Fusion Pro, Fusion Edge, and Fusion Maker laser systems (models 16000 – 17000) ensures reliable communication between the laser and your computer. There are two primary connection methods: a direct connection, where the laser is linked directly to a computer, and a network (...)

09/27/2024

Filter Control – Connection Guide

Wiring diagrams and pinouts for connecting external filtration systems to your Epilog.

Epilog Fusion Maker, Edge, Pro, and Galvo laser systems include a DB9 port on the right side of the control panel for managing external filtration systems. These signals are automatically assigned based on the selected filter type in the Epilog control panel. Currently, Epilog officially supports two filtration systems: Filtrabox (...)

07/11/2025

How Do I Choose My Laser System’s Wattage?

How do I choose the correct wattage laser for my needs?

The power of the laser source is measured in watts. Depending on the machine you are considering you will have power options for your laser source that range from 30-120 watts for CO2 laser tubes. Generally speaking, lower power CO2 laser tubes will be able to process the same materials, (...)

11/05/2023

How to Set Up Artwork for Engraving with the Rotary Attachment

How do I set up wrap-around artwork when engraving with the rotary attachment?

Using your rotary attachment to create 360 degree engravings will give even more versatility to your Epilog laser system. Setting up the artwork to wrap around an object is very simple. In this exercise we will be using The Torch MAG-Lite Flashlight as an example on how to set up (...)

09/17/2024

How to Set Up Graphics Software for Epilog Laser Systems

This guide provides step-by-step instructions for configuring and using popular graphic design software with Epilog Laser systems.

Software Setup CorelDRAW Setup Open CorelDRAW. Note: CorelDRAW Graphics Suite is the recommended CorelDraw version for use with Epilog Laser systems. Other versions, such as the Student or Standard version, may have different menu options and settings. Select Tools > Options > Global > Printing > Driver Compatibility. Choose Epilog (...)

05/09/2025

Job Generator

How do I use the "Generate" feature in the Epilog Software Suite?

The Job Generator is a new feature available in version 2.2.14 of the Epilog Software Suite. It generates a grid of diverse settings and parameters to assist in finding the ideal settings for a specific material. This document will walk you through the setup and basic functionality of this powerful (...)

09/26/2024

Laser Exhaust Requirements

What specifications should I be aware of when choosing an exhaust system?

Systems: All When specifying an exhaust system for your machine there are a number of considerations. The main minimum requirements that must be followed: CFM (Cubic Feet per Minute) or M3/hr (metric): This is the amount of air that a blower or exhaust system can move per hour of operation. The (...)

11/05/2023

Lens Removal and Installation

How do I remove and install the lens in my laser?

Maintaining and replacing the lens tube on your Epilog laser system is a straightforward process that ensures optimal performance and engraving quality. This guide provides step-by-step instructions—with visuals—for safely removing and reinstalling the lens tube. Be sure to follow each step carefully to prevent damage to the components. Removal: Loosen (...)

05/16/2024

Optimize Your Workflow: Changing Default Job Settings

How can I set up default job settings in the Software Suite?

Estimated time: 5–10 minutes • Skill: Beginner By default, jobs sent to the Epilog Software Suite use standard settings. You can customize these defaults to save setup time or better match your materials and applications. Follow the steps below to change the default job settings. Changing Default Job Settings Send (...)

11/07/2023

PhotoLaser Plus Quick Start

How do I use PhotoLaser Plus with my Laser?

This page is to provide you with special settings that we’ve developed with CADLink for PhotoLaser Plus, as well as to provide you with some quick tips that we think you’ll find helpful when using the software. Download and unzip the attached material profile settings into your C:PhotoLaser Plus (...)

09/16/2024

Power Consumption and Your Laser

How much power does an Epilog Laser system use, and how much does it ultimately cost to run one?

Using the formula and information below, you can discover how much power our laser systems draw as well as how much it costs to operate a laser. Most users are pleasantly surprised at how energy and cost efficient these powerful systems are – even our highest-wattage machine costs less than (...)

11/07/2023

Power Requirements by Laser Wattage

What are the power requirements for my Epilog based on laser wattage.

Systems: All This information is to be used only to size a power condition or an UPS (uninterruptible power supply)and should not be used to size the circuit providing voltage to the system. The circuit requirement remains as a 15 amp circuit. Laser Type Wattage Voltage Requirements Wattage of Power (...)

11/08/2023

Printing to your Laser from AutoCAD

How do I print to my laser using AutoCAD?

The following article includes general instructions and tips on printing to an Epilog Laser system from AutoCAD Software. AutoCAD is a very powerful software tool that is often used in conjunction with the laser for cutting applications. Like any tool, understanding how it works and its limitations are helpful in (...)

09/17/2024

Selecting an Uninterrupted Power Supply for your Epilog Laser System

Which uninterruptible power supply is best for my Epilog Laser system?

Spring is a time for many things, including unpredictable weather. While many people have battery backup for clocks, computers and other important devices, many don’t think of taking this important precaution when it comes to their laser. No one wants to lose a whole project because of an unexpected power (...)

11/07/2023

Silent Installation of Epilog Software Suite

As of version 2.2.16.2, the Epilog Software Suite installer includes support for silent installation, with some important caveats: Silent installation is supported, but this may not operate correctly in a headless mode. During installation, Windows may still prompt the user to confirm whether they trust Epilog as a driver publisher. (...)

07/01/2025

Usage and Operation

Fusion Edge